Mastering Series

Mastering Series CODE 102 Specifications

A Note on Loudspeaker Specifications

It is a fact that while technical specifications are definitive; performance specifications are not. A speaker will perform differently subject to the constraints of its acoustic environment. When producing performance specifications, we believe they must represent the ‘real world’. We also suggest they be used as a guide only to the potential of a specific system. Therefore our performance specifications are produced, as a result of ‘real world’ testing, conservatively and with the goal of publishing useful data as opposed to marketing hyperbole.

Enclosure Configuration  3 way active/passive bi-amped
Enclosure Type  Infinite Baffle 
Enclosure Shape  Rectangle 
Enclosure Size (H x W x D) 530mm x 765mm x 355mm
Enclosure Weight (Unpacked) 48.8KG
Enclosure Construction Material  25mm MDF 
Internal Chambers  3
Finish  GN Neutral Black
Breakout Connector  Air tight lockable 4 pin male 
Transducer Compliment   
HF Transducer  1 x 25mm soft dome
Cone transducer  2 x 184mm paper cone
Bass Extension Transducer 2 x 260mm paper cone
Nominal Impedance  8 ohms 
HF to Full Range Transducer Frequency Division Passive filter 
Filter Type  4th order double LR 
Crossover Point  2.5kHz 
With Bandwidth Extension Module (BEM)  Yes 
Full Range to Bass Extension Transducer Frequency division Active DSP
Type 4th order double LR
Crossover Point 100Hz
Bandwidth Extension Module (BEM) Yes
System Power Plant  Two way mono block 
Front Baffle  Recessed hand cut, acid etched brand, model and BEM brass plaques
Rear Panel  Acid etched anodised model serial number plaque

Performance Specifications

Sensitivity (1W / 1m) 85 dB
Sound Pressure Level (SPL) 105dB@2.5 metres
Typical mid-band Harmonic Distortion (THD) Less than 0.2%
Frequency Response (-3dB) 24Hz-32kHz

Note: All models designed to deliver maximally flat/critically damped Butterworth Low Frequency alignment in the air.

Disclaimer: The information provided on this web site may be modified at any time without prior warning. Specifications & appearance may differ from those listed or depicted.

© 2010 The relevant intellectual property applied in all GROVER NOTTING® systems is owned by Classic Audio Designs P/L or its partners Privacy Statement